3.x Case Power Switch replacement ?

[DaysOfNoah]

Hey friends,
Does anyone know where I can find a replacement power switch for an Oakley 3.x black case?

I'm purchasing an Oakley 3.0 case (double) from a fellow Oakley lover.
But the power switch is crushed/broken.
Once I get a photo I'll share.
But figured someone might already know a suitable replacement.

@Dyeraudio @Jakeracefox @Royal Commander @sQuijeW @AlanH @RiggerBill

 

[Royal Commander]

That is the power switch at bottom of case, its a rocker switch. I would unplug everything, and remove switch, most electrical supply houses could match that switch I believe. I have not replaced but there is someone that probably has. Good luck

 

[AlanH]

I took the switch out of the bottom of my 4.0 case, going to take it with me to ACE and a few other places see if I can ID it properly. Has a burn mark on it so going to have to eyeball it for mine. I would guess the 3.0 uses the same switch most likely.

 

[DaysOfNoah]

I took the switch out of the bottom of my 4.0 case, going to take it with me to ACE and a few other places see if I can ID it properly. Has a burn mark on it so going to have to eyeball it for mine. I would guess the 3.0 uses the same switch most likely.

Curious what you find out. Especially in regards to amperage.

Mine looks like 7/8 inches tall.
And 6/8 inches wide.
In the 3.0 Doublewide.

 

[Oakleygarth]

If you guys have a local electricians supply store you will have better selection and help than an ace or Lowe’s.