Little help guys

[Kevlar100]

Hi everyone, a quick question if I may.

I have a pair of 2nd gen Plasma/Fire Juliets in pretty rough condition and was curious on the value and also the cost of restoring please???

There is a serial number of P084549A on the stem.

Thanks in advance

Kev

 

[Funky-Trixtar]

Straight away, they NEED re-pinning and new ruuber set required. Condition of the frame and lenses are unknown: your pictures are blurry.

 

[TheStig]

Welcome to the forum.
If the lenses are in the same condition as the rest you are looking at $175-200,- to restore to like new condition.
To sell as is $150,-

 

[Timhyde74]

You might want to talk to @zwc0442 about getting them refinished, if the finish needs touched up. He throws the tune up in free of charge, and his re-finishing is less than $100 bucks. Then you'll need to look into lenses and rubbers, so yeah, what @TheStig said, between $175-$200 bucks for restoration, which would bring the value up considerably......



Oh!!! And Welcome to the forum!!!

 

[XxRuMKaxX]

 

[AbraxasFire]

If the lenses are in the same condition as the rest you are looking at $175-200,- to restore to like new condition.

Can confirm, that's how much it cost me to get new lenses and a re-finish on my Juliets, a couple months ago. Stellar job by @zwc0442 for the refinish and @Chris A Hardaway for the OEM lenses.

 

[Black water]

Welcome ,
My two cents...
On the budget...
Send it to re_pin ($50-$75)
After market rubbers (fleabay). $10.00
After market replacement lenses (fleabay)
$10.00
Total: 100.00
Preferably:
Send it to re-pin with one of the O forum members (50-75)
Oakley rubbers (25-50) depends on the color.
Oakley Iridium lenses depending on the color..$85-135
Total approx: $260.00
As is value around..$125.00
IMO. Let the frame alone.
By the way, remove rubber/lenses and wash the frame with a old tooth brush and deluted shampoo, the frame is not that bad, and the new pins will replace the old ones..
Don't loose the screws.

 

[Stones2117]

Welcome