• Take 30 seconds to register your free account to access deals, post topics, and view exclusive content!

    Register Today

    Join the largest Oakley Forum on the web!

Frogskins Ti replacement lenses?

Try buying an Asian Fit Frogskin set of lenses in the color you want first. See if they fit as is. If they don't fit I'll only charge you like $26 to trim, fit and return to you. Many have actually found them to fit just right!
would you have one already there with you? how much if shipped to Dubai?
 
Hi Guys, was just reading through the posts and wondered about the sizing aswell, I have a couple of pairs of the Ti froggies and also a pair of the Old Glory Custom Frogskins also (Ice Iridium lenses), as stated the Ti are a 56mm the Old Glory run a 55mm. I undid the Ti and popped the lenses out and replaced with the Ice Iridium and this is the result, lenses are snug no loose movement what so ever. No noticeable gaps around corners from what I can tell, and they look pretty good to boot.

So if looking to update the lenses you should be fine running a 55mm lense.

Hope this helps.

IMG_20250109_225608.jpg


IMG_20250109_231151~2.jpg
 
I know this is an old thread, but I’m also curious about this. Did you ever find lenses that fit the Frogskins Ti without trimming? I’m running into the same issue with mine.
 
Which lens size have you purchased??
Any gen 3 or gen 4 even frog lense will fit. Some may be slightly tight but will go in eventually. I put numerous gen 3 frog lenses in my TI when I owned it and had zero problems getting them to fit. TI frog lenses are just slightly smaller and have a slight bevel to them. Some of the newer gen 4.5 frames have lenses that will not fit without a shave but you will probably find a set that works eventually. They have such a variance to them all. Must be a tolerance in production. Gen 3 definitely work though without question and without dismantling the TI frame..
 

Latest Posts

Back
Top