U
Username Hidden
Guest
- Region
- North America
Updated mars for sale
* Custom Cut Ruby Prizm lenses with some good purpling in them, they have superficial cleaning mars that can only be captured under the correct lighting and angle 9/10 no marks that effect vision or are noticeable to the wearer. But they are there and can be seen if your looking for them.
* Finish 9/10 they have been worn but no damage or excessive shinny spots
* Nose bridge tight no wiggle 9.75/10
* Oem oakley red rubbers with “made in USA” print on them not the oem mars rubbers that had no marking on them 9/10 no sticky
* Aluminum C clips no steel that could damage the glasses trying to be removed, risk factor mitigated these should be easy to spread if need be.
The left lens has a little wiggle rattle to it. Unfortunately that’s the nature of mars sometimes you don’t know until you close the clips if it’s going to tighten up enough, the little rattle don’t bother me I’m not doing jumping jacks or head banging
with them on but Chris A Hardaway Can direct you to a product that can stop this that goes inside the rim if you do end up getting them and it does bother you.
It will come with a zipper case some cleaning microfiber cloths and a bag.
I really don’t know where to start with these so price police just hold your horses, I know you’d love to see me post them for 500 bucks and you run away with them skipping and giggling but that’s not going to happen.
I see beaters being sold all over the board from 700-1100 dollars and these are far from a beater So I’ll start at1100, price lowered to $OLD and I’ll continue lower the price accordingly from there if no takers.
I’ll post a video tonight of them asap
And I some pictures out in the sun trying to capture the cleaning marks tomorrow.
Lens pics added
* Custom Cut Ruby Prizm lenses with some good purpling in them, they have superficial cleaning mars that can only be captured under the correct lighting and angle 9/10 no marks that effect vision or are noticeable to the wearer. But they are there and can be seen if your looking for them.
* Finish 9/10 they have been worn but no damage or excessive shinny spots
* Nose bridge tight no wiggle 9.75/10
* Oem oakley red rubbers with “made in USA” print on them not the oem mars rubbers that had no marking on them 9/10 no sticky
* Aluminum C clips no steel that could damage the glasses trying to be removed, risk factor mitigated these should be easy to spread if need be.
The left lens has a little wiggle rattle to it. Unfortunately that’s the nature of mars sometimes you don’t know until you close the clips if it’s going to tighten up enough, the little rattle don’t bother me I’m not doing jumping jacks or head banging
with them on but Chris A Hardaway Can direct you to a product that can stop this that goes inside the rim if you do end up getting them and it does bother you.It will come with a zipper case some cleaning microfiber cloths and a bag.
I really don’t know where to start with these so price police just hold your horses, I know you’d love to see me post them for 500 bucks and you run away with them skipping and giggling but that’s not going to happen.
I see beaters being sold all over the board from 700-1100 dollars and these are far from a beater So I’ll start at
I’ll post a video tonight of them asap
And I some pictures out in the sun trying to capture the cleaning marks tomorrow.
Lens pics added
Last edited:
). That’s why my one MARS Standard is readers!
