Minute Machine Tool

[cjtappon23]

Hey all,
I'm sure this has been answered somewhere on here but wanted to ask- What is the specific tool needed to add/remove links and change out the washers on a minute machine?

 

[IAMOBS]

I forget what size but it’s just a regular allen wrench.

 

[alol]

Just be careful when undoing, You might want to use a bit of penetrating fluid like WD-40 and go gently after soaking the Bracelet. You can (as I have found to my cost) snap a screw head more easily than you'd expect ......

 

[XxRuMKaxX]

Don't overtighten... snug is plenty... 3/32 is the proper hex bit

I bought the titan mini wrench with bits off amazon... it has everything you will ever need for Oakley stuff and good quality bits...

https://www.amazon.com/Titan-TIT16092-Ratcheting-Precision-Screwdriver/dp/B01KB02F9C

 

[zwc0442]

Just a heads up they're actually 2.5mm. Oakley used metric pretty much everywhere on watches. But 3/32 is very close comes, out to 2.38 mm. 2.5mm fits nice and snug tho. Been using this wera driver for years. It's taken out many screws that had been stripped by others previously.