Juliet self repair HELP

[Gotheem22]

I have all the parts/equiptment needed to tighten my Juliets i am almost done taking them apart. I am stuck on the nose piece. Any1 know or can walk me thru getting these pegs out of the nose piece. Im stuck HELP please

 

[ShortChangeHero]

@Linegear Japan has a very handy tool that makes it easy.

 

[Gotheem22]

Whats the cost? Do i have to send them somewhere or are you talking about buying the tool

 

[ShortChangeHero]

It’s a tool which helps you push out the pins. There is other and very creative methods however they are not recommended. Even though they are made of TI they can still bend, break and crack. If you want to send them in to get retuned and possible refinished I would recommend @zwc0442 and @THE X-MAN

 

[Da veracity]

The tool is about $65.

 

[ShortChangeHero]

@Linegear Japan also offers the retune service but they are located in Japan.

Line-gear japan website has a step by step directions how it’s done.

@cacatman has all the list for x metal questions. He might have the thread where it describes the process

 

[Gotheem22]

Thanks guys, im bored here and thought i can do it without the pin pushing tool guess not. Thanks again.

 

[stevelvv]

Yes you can. Go to Harbor Freight and get a pin punch set for 5 bucks. Use the 1/16" to drive the pin out, and the 1/8" to drive it back in on the head side. The pins won't bend. Main thing is to have it aligned perfectly with the holes and the flex coupler to get the new ones in. DON'T FORCE IT.
You need a good surface to stabilize the pieces. I used a towel to cradle the nose piece to the lens frame. It worked.
You going to do the temple shocks, gaskets, nose rests?

 

["TRUMP"]

Rule #1: never buy anything from harbor freight

 

[Oakley OCD]

Dasco Pro