lloydrose
I should Work at Oakley
WOW
Can't wait to see the finished product installed on a frame!
Can't wait to see the finished product installed on a frame!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
No not at all. Fits like a glove I’m just fine tuning the nose piece area and make it more square vs the way it was.Amazing! Any fit issues getting it into the frame? Looks super awesome.
Great work and attention to detail... it's a satisfying feeling cutting off Polycarbonate. The swarf you get is just so different from cr-39 hard train plastic that turns into dust (powder)... white powder. Let the jokes begin @LitosSo I found the need to replace some of the old school heater lenses today as the vented positive red I had decided to craze and cause distortions. I grabbed a couple a frame 2.0 donor lenses I had this morning an went about my way to work. Since we were slow and I had a good template handy I went to town. Mind you everything was done by hand with the exception of the pneumatic tools. I grabbed some diamond coated dremel bits, traced my pattern out and stopped. Thinking to myself man am I really about to go at this. Thought for a brief second. Screw it. Cranked the air dremel up to a decent rpm and started hacking the lens into shape. Btw not for the faint hearted lol. Start out rough cutting then went at it by hand with 80 grit sand paper to get the shape. Moved to a rat tail file to knock out the vented areas an notches for the lugs. Finished it off with a wet sanding off 500. We have some diamond grit paper glass lenses I’ll throw the fine grit at the edges with some wet sanding as well. But over all very please with the handy
View attachment 1050569
View attachment 1050570
View attachment 1050571
View attachment 1050572
View attachment 1050573
View attachment 1050575
donor meaning a template to use for placing the shape on the lens . I dont won any zeros / sub zeros.