haha161
Oakley Beginner
- 8
- 53
dismantle a halfwire for cleaning
carry out at your own risk
coz my lenses have deep scratches on it, so i wouldn't mind adding a few more
not recommended if you intend to collect it,
can feel the two tiny screws about to strip the head when assembling everything
again.......
first undo the two tiny philips screws at the back of the nose bridge,
after remove the nose bridge clamp
bend the lens a little backward on the nose bridge side,
you should be able to remove the lens out after the notch has clear the nose bridge
area,
after cleaning ,reverse the above and done,
carry out at your own risk
coz my lenses have deep scratches on it, so i wouldn't mind adding a few more
not recommended if you intend to collect it,
can feel the two tiny screws about to strip the head when assembling everything
again.......
first undo the two tiny philips screws at the back of the nose bridge,
after remove the nose bridge clamp
bend the lens a little backward on the nose bridge side,
you should be able to remove the lens out after the notch has clear the nose bridge
area,
after cleaning ,reverse the above and done,